คำอธิบาย
คุณสมบัติของ LANDTEK HM-934-1+ Barcol Impressor
Brinell Hardness (HB), Vickers Hardness (HV), Webster Hardness (HW), Rockwell Hardness (HRB/HRE/HRF/HRH).
The relevant industry standard is ASTM B648-10(2015), ASTM D2583-13, GB/T 3854-2005.
A digital indentation hardness tester, is the latest design and development of our company.
It is characterized in that provided with a balance positioning, a digital display of hardness value, and a non disassembly calibration and adjusting.
It is with good stability, convenient calibration, and high accuracy of detection.
Small in size, portable. Single hand operation, easy to use. Can be used in any occasion as long as the hand can reach.
Wide test range, can test from very soft pure aluminum to a particularly hard aluminum alloy. effective test range equivalent to the Brinell Hardness of 25~135HB.
No need to support. The hardness tester is only tested on one side of the sample without support.
Can be used for measuring Barcol Hardness, other hardness value can be calculated out by the experimental curve. Such as
With the maximum hold function, hold the maximum hardness value during measurement.
With the function of calculating the average value, and the average value of the 29 sets of data are calculated at most.
Provide Bluetooth data output choice.
แบรนด์สินค้า LANDTEK รุ่น HM-934-1+
ข้อมูลทางเทคนิค
ช่วงการวัดความแข็งอลูมิเนียม 0 ถึง 100Hba,Amount to 25 ถึง 135HBW
ความละเอียด Resolution 0.1HBa
ความแม่นยำ Accuracy ±1Hba
Brinell Hardness
Vickers Hardness
Wenster Hardness
Rockwell hardness
Maximum Hold
Average Calculation
Operating Condition Temperature:0~50ºC Humidity:<80%RH
แหล่งพลังงาน 2×1.5V AAA(UM-4)Battery
ขนาดเครื่อง 170x63x82mm
น้ำหนัก 390g(Not Including Batteries)
ภายในกล่องประกอบด้วย
Main Unit
2 Pins
2 Standard Blocks
Screw Driver
Spanner
Carrying Case
Operation Manual
Bluetooth Data Adapter with Software (ต้องซื้อเพิ่ม)
ไฟล์ข้อมูลสินค้าDATA SHEETUSER MANUAL
รีวิว
ยังไม่มีบทวิจารณ์